CBS Packs
- All
- Newly Added Items
- Shipping Material
- Labels & Stickers
- AC Power Cords
- Alternators
- Antennas
- Board & Sink - BS Packs
- Blowers
- Bridge Rectifier
- Cabinets
- Cable
- Capacitors
- Ceramic Doorknob Capacitors
- CB Radios
- CBS Packs
- Chimney AC Teflon - TFE
- Circuit Board
- Circuit Breakers
- Coax Cable
- Combiners
- Connectors
- Copper End Plate
- Copper Lugs
- Diodes
- External Rectifier
- Fans & Fan Grill Guards
- Ferrite
- Field Strength Meter
- Fuse & Fuse Holders
- Gamma Rods
- Grommets & Strain Relief
- Ground Strap
- Hardware
- Heatsink
- Heatsink/Thermal Compound
- Idler & Pulley
- Input-Output Chokes
- Insulators
- Knobs
- LEDs
- Meters & Shunts
- Miscellaneous Parts
- Modules
- Pill Strips & Power Strips
- Potentiometers
- Power Plugs
- Power Supplies
- Preamp
- Prototyping Boards
- Quick Disconnects
- Radio Covers
- Regulators
- Relays
- Remotes
- Resistors
- RF Chokes
- RF Transformer
- Rubber Feet
- Shrink Sleeve
- Soldering
- Solenoids
- Stryker Nitro Radio Knob
- Switches
- Terminals
- Thermal Insulator Pads-Mosfet
- Tools
- Transformers
- Transistors
- Watt Meter Equipment
- Wire
- Zip Cord
Filters
2 Fan Lid
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes 120mm Fans
INCLUDES:
DC Cabinet: C-DC- Base (14 1/4" x 20 5/8" x 5 3/4")
Board & Sink- 2x8
*Circuit Board: P-CB-2x8(11 1/4 x9)
*Heatsink: (2 Piece) (9 1/4" x 4 1/4" x 1 3/8")
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options Available
DOES NOT HAVE A FAN
Nylon Grommet:
Snap in plug:
1/4 remote hole
INCLUDES:
DC Cabinet: C-DC-2 (6 1/2" x 3 3/4" x 3 1/8")
Circuit Board: P-CB-2 (5" x 3 3/8")
Heatsink: P-HS-2 (1 Piece) (2 1/2" x 4 1/4" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Utilizes one 92mm fan
Nylon Grommets: 5008( Fits Original Drilled Hole)
Nickle-Plated Snap-in Plug: 3/8" Dia
1/4 remote hole
Dimensions:
Cabinet: C-DC-3(7 1/2" x 5" x 4")
Circuit Board:C-PB-2 pill extended (6 13/16" x 4")
Heatsink: P-HS-3 (1 Piece) (3 1/4" x 5 3/8" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Utilizes a 92.5mm fan & grill
Nylon Grommets: 5008( Fits original drilled hole)
3/8" Dia Nickle-Plated Snap-in Plug
1/4 remote hole
INCLUDES:
DC Cabinet: C-DC-3 (7 1/2" x 5" x 4")
Circuit Board: P-CB-1x2 (6 13/16" x 4")
Heatsink: P-HS-3 (1 Piece) (3 1/4" x 5 3/8" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options are available
Utilizes one 80mm fan
Nylon Grommet: 5008(Fits original drilled hole)
1/4 remote hole
INCLUDES:
DC Cabinet: C-DC-4 Mobile (6 3/8" x 5 1/4" x 4")
Circuit Board: P-CB-4 Mobile (6 3/16" x 4 1/2")
Heatsink: P-HS-3 (1 Piece) (3 1/2" x 5 3/8" x 1 3/8")
Photos are for reference only
Reference photo display a clear coat cabinet
*Screws Not Included - Screws can be purchased from our "Hardware" section
Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled
Utilizes one 80mm fan
Nylon Grommet: 5008 or 5010 (Fits Original Drilled Hole)
INCULDED:
Cabinet: C-DC-4.5 (7 1/4 x 6 3/8 x 4)
Circuit Board: P-CB-4.5( 6 1/2” x 6 7/16”)
Heatsink: P-HS-3(5 3/8” x 3 1/2”)
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Only available in clear coat
This unit utilizes one 92.5mm Fan
Nylon Grommet:5008 ( Fits Original drilled hole)
INCULDES:
Cabinet : C-DC-4 Base(12" x 7 3/4" x 5 1/4")
Circuit Board: P-CB-4 Base (7 5/8" x 5 1/8")
Heatsink: P-HS-4(6 3/8" x 5 3/8" x 1 3/8")
These are set up to fit our power supply modules
Cabinet and Board and Sink & Cord and Socket for Back only.
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options Available
This unit utilizes one 120mm Fan
Nylon Grommet:5010 (Fits Original Drilled Hole)
INCLUDES:
DC Cabinet: C-DC-5 (11" x 6 3/8" x 4")
Circuit Board: P-CB-2x4 (10 1/4" x 6 1/2")
Heatsink: P-HS-5 (1 Piece) (8 1/4" x 5 3/8" x 1 3/8")
Picture is for reference purposes only
The cabinet in the photos is clear coated
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes two 120mm Fan
Nylon Grommets: 5017 or 2653( Fits Original Drilled Hole)
INCLUDES:
Cabinet: C-DC-5.5 Base (14 1/4" x 13 1/2" x 5 1/4")
Circuit Board: P-CB-2x4 (10 1/4" x 6 1/2")
Heatsink: P-HS-5 (1 Piece) (8 1/4" x 5 3/8" x 1 3/8")
Photos are for reference purposes only
photos display a clear coated cabinet
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes one 120mm Fan
Nylon Grommet: 5008( Fits Original Drilled Hole)
INCLUDES:
Cabinet: C-DC-6 (12" x 7 3/4" x 5 1/4")
Circuit Board: P-CB-2x4L (11 1/4" x 7 5/8")
Heatsink: P-HS-M (1 Piece) (9 1/4" x 5 3/8" x 1 3/8")
Photo is for refernece purposes only
Photos display a clear coated cabinet
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options Available
This unit utilizes one 120mm fan
Nylon Grommet:5008(Fits original drilled hole)
INCLUDES:
Cabinet: C-DC-5
Circuit Board: P-CB-6
Heatsink:
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section*
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options Available
This unit utilizes one 120mm fan
Nylon Grommet:5008 (Fits Original Drilled Hole)
INCLUDES:
Cabinet: C-DC-6 (12" x 7 3/4" x 5 1/4")
Circuit Board: P-CB-2x6 (11 1/4" x 7 5/8")
Heatsink: (1 Piece) (9 1/2" x 5.888" x 1 5/16")
Photos are for reference purposes only
Displayed in the pictures is a clear coated cabinet
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes 120mm Fans
Nylon Grommet: 2653(Fits Original drilled hole)
INCLUDES:
Cabinet: C-DC-2×8 Base (14 1/4" x 20 5/8" x 5 3/4")
Circuit Board: P-CB-2x6 (11 1/4" x 7 5/8")
Heatsink:P-HS-8 (1 Piece) (9 1/2" x 6 1/5” x 1 5/16")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes one 120mm Fan
Nylon Grommet:5008(Fits original drilled hole)
INCULDES:
Cabinet:C-DC-6 (12x 7.75 x 5.25)
Circuit Board: P-CB -8S (11.25” x 7.625”)
Heatsink: P-HS-M (9 1/4 x 5 3/8 x 1 3/8)
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
Coating Options Available
This unit utilizes two 120mm fans
Nylon Grommet: 5017 or 2654(Fits Originally drilled hole)
INCLUDES:
DC Cabinet: C-DC-2x8 (12 7/8" x9 1/4" x 5 1/4")
Circuit Board: P-CB-2x8 (11 1/4" x 9")
Heatsink: P-HS-2x8 (2 Piece) (9 1/2" x 4" x 1 5/16")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This Unit utilizes two 120mm fans
Nylon Grommet:2653(Fits Original drilled hole)
INCLUDES:
DC Cabinet: C-DC-2x8
Circuit Board: P-CB-10 (11 1/4" x 9")
Heatsink: P-HS-M(1 Piece) (9.25" x 5 .88" x 1 .270")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
2x8 Base Cabinet (14 1/4" x 20 5/8" x 5 3/4"):
Board & Sink (BS) - 10
This unit utilizes 120mm Fans
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This utilizes four 120mm fans
Nylon Grommet: 2653 or 2656 (Original Drilled Hole)
INCLUDES:
Cabinet: C-DC-16 (14 1/4" x 13 1/2" x 5 1/4")
Circuit Board: P-CB-16 OR P-CB-8 Large
Heatsink: P-HS-M (2 Pieces) (9 1/4" x 5 3/8" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This Unit utilizes four 120mm fans
Nylon Grommet:
INCLUDES:
DC Cabinet: C-DC-24 Mobile (20 1/2" x 13 1/2" x 5 1/4")
Circuit Board: P-CB-24 Mobile (19 1/4" x 13 5/16")
Heatsink: P-HS-L (2 Pieces) (17 1/2" x 5 3/8" x 1 3/8")
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
Additional shipping costs may apply
*Screws Not Included - Screws can be purchased from our "Hardware" section.
*Mounted means that the Circuit Board is Mounted (screwed) to the Heatsink and the Transistor Holes are Drilled*
This unit utilizes four 120mm fans
Nylon Grommet:
INCLUDES:
DC Cabinet: C-DC-48 Jumbo (23 1/4" x 26 13/16" x 6 1/4")
Circuit Board: P-CB-48 Jumbo (26 3/4" x 22 3/16")
Heatsink: P-HS-L (4 Pieces) (17 1/2" x 7 1/4" x 1 3/8" Each Piece)
Picture is for reference only
Cabinet has a Clear Coat Finish in reference photos
Additional shipping costs may apply
