C-UN-PRE
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Dimensions: 4 1/8" x 3" x 1 5/8"
Thickness: .063
In the front of the cabinet the three holes are typically used for a Potentiometer ,Switch, and LED Light w/ LED Holder.
In the back of the Cabinet the first hole on the left is typically used for the power plug as well as the next two holes are used for SO-239 Bakelite Connector.
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Dimensions: 4 1/8" x 3" x 1 5/8"
Thickness: .063
In the front of the cabinet the three holes are typically used for a Potentiometer ,Switch, and LED Light w/ LED Holder.
In the back of the Cabinet the first hole on the left is typically used for the power plug as well as the next two holes are used for SO-239 Bakelite Connector.
*Screws Not Included - Screws can be purchased from our "Hardware" section.
Dimensions: 4 1/8" x 3" x 1 5/8"
Thickness: .063
In the front of the cabinet the three holes are typically used for a Potentiometer ,Switch, and LED Light w/ LED Holder.
In the back of the Cabinet the first hole on the left is typically used for the power plug as well as the next two holes are used for SO-239 Bakelite Connector.
